Mazak Ultra 650X CNC

Horizontal Machining Center

Make: Mazak
Model: Ultra 650X
Description: CNC Horizontal Machining Center
Category: Machining Centers, Horizontal, N/C & CNC
Year: 1996
Stock #: 500-285
Serial #: 122832
Machine Location: Edmonton
Machine Demensions: 140.4″ x 203.4″ x 113.11″
Machine weight: 37840 lbs

Control: Mazatrol M-Plus
Pallet Size: 248” x 248”
Floor Space Required: 140.4″ x 203.4″
Machine height from bottom of base: 113.11”
Total power required (machine only): 64 KVA
NOTE : Actual Machine Main Transformer KVA Rating will be greater.
Machine Weight: 37,840 lbs.
Travels:
X-Axis travel: 40”
Y-Axis travel: 31.5”
Z-Axis travel: 31”
Distance from spindle center to top of pallet: 1.97” – 33.46”
Distance from spindle nose to pallet center: 6.69” – 37.72”Workpiece size:
Max workpiece weight: 3,000 lbs
Max workpiece height: 37.4”
Max workpiece diameter: 39.4”
Max workpiece envelope: (x & Z): 40” x 31”
Spindle:
Spindle nose: CAT #50
Spindle horsepower (Cont/30min): 30/35HP
Obtainse full HP @ 240 RPMs
Constant torque range: 35 – 7,000
Spindle speed increment: 1 RPM
Number of ranges: 4 (2 gear/2 elec.)
Tool clamping force: 4,630 lbs
Spindle bearings front (number/type): 2 roll/2 ang cont.
Spindle bearings rear (number/type): 1 set roller bear.
Spindle colling system: Chiller/fan coller
Automatic tool changer:
Magazine capacity: 40
Tool-to-tool time: 2.5 seconds
Chip-to-chip time (approx.): 6.5 seconds
Max tool diameter: 5.31”
Max tool dia. w/adjacent pockets empty: 10.24”
Max tool length: 19.69”
*The spindle cannot reach the minimum specifications of 1.97” and 6.69” simultaneouslyServo/Axis drives:
Type of servo drives: Digital AC motors
Rapid traverse rate (X & Y Axis): 1,000 IPM
Rapid traverse rate (Z-Axis): 787 IPM
Max. Programmable federate (X&Y Axis): 1,000 IPM
Max programmable federate: (Z-Axis): 787 IPM
X-Axis thrust: 1,764 lbs
Y-Axis thrust: 1,984 lbs
Z-Axis thrust: (Cont/30% duty): 3,968 / 7,716 lbs
Equipped with:
Mazatrol M Plus Control
14” Color CRT
80 Tool chain magazine
Auto tool length measurement
Helical interpolation
User macro
Mazacc-2D High-speed software package
Rigid / Synchronized tapping
EIA/ISO Code input function
Mazatrol and EIA/ISO Combined program
RS-232C interface
Background tool path check
Spindle output selection
Programmable maintenance check display and operator alert
Niagara coolant (1.5KW/#50)
Flood coolant system
Work light
Manuals
Manual pulse generator
Cycle-S. Feed-H. Button on 2P/C panel
Adaptive federate control
Tool life monitoring
Tool breakage detection
Auto power off (Breaker trip)• Automatic 2 pallet changer with automatic front door open/close & safety cover
• Full Coverage Chip & Coolant Enclosure
• Complete Coolant System with 145 ·Gallon Capacity
Through-the-spindle-coolant – Provides coolant at 128 PSI @ 32 GPM
Flood coolant system – Provides coolant at Spindle Nose at 106 PSI @ 12 GPM
Niagara Coolant System – Provides coolant from overhead at 40 GPM
• Front exit hinge belt style chip conveyor (for steel chips only)
• Standard worklight inside of machine chip & coolant enclosure
• Air blast system on spindleMazatrol M-Plus 32-Bit CNC Control:
1. Monitoring system “C” which includes the following features:
-Adaptive Feedrate Control: monitors load on the spindle motor and Z-Axis servo motor. The control can then adjust feedrates accordingly to obtain optimum cutting feedrates.
-Tool life management: Tool life can be set by time, number of parts, or wear. If tool life expires then machining stops or a spare tool is selected if programmed.
-Spare tool selection: When tool life has expired spare tool selection will select a redundant tool of the same type that has expired automatically.
-Tool breakage recover: After a tool is done machining it is checked to see if it is broken or not. The machine will then proceed according to the programs instructions.
2. Automatic tool length measurement
-This feature allows the machine to automatically measure a tool’s length and enter it into the tool data page of the M-plus control. It can also be used to check and see if a tool is worn or broken and if a spare tool is programmed it will select the spare tool automatically.
3. Mazacc 2-D software
– This feature allows for higher programmable federates while still maintaining part accuracies
4. Flexprint interface
Division: Pre-Owned Equipment
Stock #: 500-285
Location: Edmonton, AB
Type: Machining Centers, Horizontal CNC
Brand: Mazak
Model: Ultra 650X
Year: 1996
Back to top